Solar energy is increasingly popular as a renewable energy source, offering companies and homes a clean and sustainable method to produce electricity. Understanding the fundamental variables that characterize solar panel performance and efficiency is essential for making well-informed decisions concerning solar panel installations. In this article, we will explore the numerous values and specifications related to solar panels, elucidating their meanings and illustrating how they affect the performance of solar panels.
Nominal Max. Power (Pmax)
The nominal power, also known as the nameplate capacity of photovoltaic (PV) devices including solar cells, panels, and systems, is calculated by measuring the electric current and voltage in a circuit while adjusting the resistance under carefully controlled circumstances. Standards like IEC 61215, IEC 61646, and UL 1703 specify this Standard Test Conditions (STC), with the light intensity being 1000 W/m² 2. In CS3L-350MS standard solar Pmax will be 350W 1.
Maximum Power Voltage (Vmp)/ Opt. Operating Voltage
This is the voltage present when the panel is connected to a load and working at full capacity during a typical test. Vmp is often specified by solar panel manufacturers to be between 70% and 80% of the Voc 3. For example, in CS3L-350MS standard solar Vmp will be 33V 1.
Maximum Power Current (Imp)/ Opt. Operating Voltage
The current (amperage) that a solar power panel produces at its greatest output is known as the maximum Power Point Current (Imp). When the panel is connected to a charge controller during a typical test, it is the current you wish to see. Imp changes depending on how much sunshine is shining on the panel5. For example, in CS3L-350MS standard solar Imp will be 10.61V 1.
Open Circuit Voltage (Voc)
VOC = open-circuit voltage is the maximum voltage that the array provides when the terminals are not connected to any load (an open circuit condition). This value is much higher than Vmp which relates to the operation of the PV array which is fixed by the load. This value depends upon the number of PV panels connected together in series 8. For example, in CS3L-350MS standard solar Voc will be 40.2V1.
Short Circuit Current (Isc)
When the positive and negative terminals of a solar power panel are connected to one another, a current called short circuit current (Isc) is produced. Isc is used to calculate how many amps a solar panel can safely take when connected to a load. It displays the maximum current that a solar power panel can produce without harming the panel itself 5. For example, in CS3L-350MS standard solar Isc will be 11.24 A1.
Module Efficiency
Efficiency is a key indicator of how well they convert sunlight into electricity and is a critical measurement for solar energy systems. For solar panels that are readily accessible on the market, it is given as a percentage and normally ranges between 15% and 23% 7. For a given quantity of sunshine, more efficient panels produce more power, which makes them suitable for installations with limited space. In CS3L-350MS standard solar module efficiency will be 18.9%1.
Operating Temperature Coefficient
At lower temperatures, solar panels are more effective, and as the temperature rises, their production falls. The efficiency of a solar power panel normally decreases by 0.3% to 0.5% for each degree Celsius over 25°C (77°F) 6. The temperature coefficient evaluates this effect and expresses it as a percentage change in efficiency. Better performance in hot temperatures is indicated by a lower temperature coefficient. For example, a CS3L solar module works with in the temperature between -40ºC – +85 ºC 1.
Max. System Voltage
The solar panels themselves also have a maximum system voltage that must not be exceeded. Typically the maximum voltage of CS3L-350MS standard solar module is 1500 V (IEC/UL) or 1000 V (IEC/UL) 1.
Module Fire Performance
The International Building Code (IBC), new terminology adopted in 2012, mandates that a solar PV system equal the requisite fire rating of the roof14. This is with the view of giving firefighters the ability to fight fires on roofs and to ensure that in the event of a fire, the solar PV system installed on the roof will not accelerate the fire, but slow it down.
Roofs that can resist a severe fire test exposure are considered to be Class A roofs. Solar PV systems must be tested, listed, and designated with a Class A fire rating in accordance with UL 1703 for use on buildings and structures that need Class A roofs14.
Class C roofs are those that are effective against light fire-test exposure. Class C roof assemblies and roof coverings shall be listed and identified as Class C by an approved testing agency14.
Max. Series Fuse Rating
Most solar PV modules (not panels) have maximum series fuse ratings of 15 A, while some of them are currently being made to resist 20 A. This is the maximum current that may ever be imposed on a PV module under any condition15. For example, maximum series fuse rating of CS3L-350MS standard solar module is 20A 1.
Power Tolerance
The amount of electricity that a solar panel can produce above or below its specified capacity is known as power tolerance. For example, a 100-watt panel with a -4%/+4% power tolerance can deliver between 96 and 106 watts in actual use5. In CS3L-350MS standard solar panel’s power tolerance is 0 – +10W1.
Degradation Rate
Over time, part of the efficiency of solar panels is lost due to deterioration. The yearly efficiency loss is represented by the degradation rate, which for high-quality panels is typically between 0.5% and 1%. High-quality solar power panels degrade at a rate of around 0.5% each year, producing 12-15% less electricity at the end of their 25–30 year lifespan 9. A panel’s long-term performance and return on investment may be estimated with the use of degradation rates.
Angle of Incidence
The efficiency of a solar panel is influenced by the angle of incidence at which sunlight reaches it. In order to maximize energy capture, panels are often set at an angle; however, to achieve the best performance, this angle may need to be changed seasonally or during the day. The highest solar cell performance may therefore be obtained between a -45° and +45° angle of sunlight incident 9.
Dust and Soiling Loss
On the surface of the panel, accumulation of dust, grime, and other debris might lessen its efficiency. The photovoltaic cells have low conversion efficiencies in the range of 16% to 18%, the accumulation of sand and dust particles from the outdoor environment on their surface further reduces the generated output power 12. To minimize dust and soiling losses, especially in dry and dusty conditions, regular cleaning and maintenance is necessary.
Shading
The output of a solar panel can be greatly impacted by even a little shadowing. Shading losses can be reduced by comprehending shading patterns and using strategies like bypassing diodes in the construction of the solar array. The power output can be reduced by 75% by shading just 1/36 of the cells 13.
In order to make wise choices about the installation of solar systems, it is essential to grasp the fundamental values related to solar panels. Efficiency, wattage, temperature coefficient, tolerance, and other parameters are crucial in assessing a solar panel system’s overall performance, lifetime, and return on investment. You may choose the ideal solar panels for your unique requirements and environmental circumstances by carefully weighing these factors, eventually harnessing the sun’s energy to produce clean and sustainable electricity.
